• 3 Buttons to set precise time in increments of 1, 5, or 10 minutes, up to a maximum of 1 hour.

• Add time while the timer is running.

• Read exactly how much time remains; the molded guide on the timer's back assists you.

• Single button cancel / clear.

• A beeper and flashing lights alert you when the time runs out.

• Battery saving features include: (1) LED turnoff after a short idle period (2) Auto-turnoff 1/2 hour after a timeout (3) A 'power save' switch for maximum battery life.

• Includes 3 "AA" batteries

Questions?  Feel free to contact us.

You can look at the LEDs and watch the time disappear.  If you need to know the exact amount of time remaining, you can see in one of 3 ways.

1) The easy way... Watch the sand (lights) go from the top to bottom as the seconds tick away.

2) For the Real Nerd, each lit LED in the top array of 15 is equal to four minutes. Add the value from the 3 ‘neck” LEDs: The top LED is worth 3 minutes, the middle one is 2 minutes, and the bottom is 1 minute. Fig. 5 shows the pattern at 13 minutes [3 LEDs x 4 minutes + the bottom neck LED is 1 minute more.]

3) For the Aspiring Nerd, follow the guide molded on the back of the timer (Fig. 6): Find the position of the highest value of the lit LEDs, and add the minutes described by the ‘neck” LEDs. In Fig. 5, the LEDs in the 4, 8, and 12 positions are lit, as is the "1" in the neck LEDs. Since 12 is the highest of the values, there are 12 + 1 = 13 minutes remaining.

Note that it displays “13” just up until the moment when the time decreases to 12 minutes.

Shipping to USA & Canada only from this page.  For international shipping please click on "All Products" at the top of the page.